{"data":{"id":"354800","string_id":"cjXvH12I","status":"1","parent_id":"0","slug":"cjXvH12I","order":"7","name":"OneWLink","type":"1","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","author":"","published_time":"1741486539","add_time":"1741307908","update_time":"1783057229","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"1","tags":[],"child":[{"id":"354801","string_id":"S3JgOfGI","status":"1","parent_id":"354800","slug":"S3JgOfGI","order":"0","name":"OneWLink Instruction","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1752026591","add_time":"1741307912","update_time":"1752026611","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"354801\", \"354800\"]","content":{"content_id":"354801","content":"

Product characteristics<\/h2>\n
\n
Very low cost data transmission solution<\/li>\n
200m communication distance<\/li>\n
2.4G communication frequency<\/li>\n
Support APM\/PX4 open source flight control<\/li>\n<\/ol>\n
<\/p>\n
OneWLink Specifications<\/h2>\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Item<\/strong><\/td>\n Default parameter<\/strong><\/td>\n<\/tr>\n
WIFI ID<\/td>\n ZeroOneAero_xxx<\/td>\n<\/tr>\n
WIFI password<\/td>\n zerooneaero<\/td>\n<\/tr>\n
IP address<\/td>\n 192.168.2.1<\/td>\n<\/tr>\n
Subnet mask<\/td>\n 255.255.255.0<\/td>\n<\/tr>\n
Gateway<\/td>\n 192.168.2.1<\/td>\n<\/tr>\n
Port number<\/td>\n 14550<\/td>\n<\/tr>\n
Serial port baud rate<\/td>\n 921600<\/td>\n<\/tr>\n
Operating voltage<\/td>\n 5V<\/td>\n<\/tr>\n
Size<\/td>\n 2819mm<\/td>\n<\/tr>\n
weight<\/td>\n about 44g<\/td>\n<\/tr>\n
Support flight control<\/td>\n ArduPilot PX4<\/td>\n<\/tr>\n
Communication protocol<\/td>\n UDP<\/td>\n<\/tr>\n
WIFI transmit power<\/td>\n Maximum 19.5DBM<\/td>\n<\/tr>\n
WIFI frequency range<\/td>\n 2.4-2.4835G<\/td>\n<\/tr>\n
WIFI channel<\/td>\n 1-14<\/td>\n<\/tr>\n
WIFI transmission rate<\/td>\n 11B\/G\/N<\/td>\n<\/tr>\n
WIFI antenna gain<\/td>\n 3DB<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/p>\n
Size<\/h2>\n
$\"\"$ <\/p>","pure_content":"Product characteristics\n\nVery low cost data transmission solution\n200m communication distance\n2.4G communication frequency\nSupport APM\/PX4 open source flight control\n\n\u00a0\nOneWLink Specifications\n\n\n\n Item\n Default parameter\n\n\n WIFI ID\n ZeroOneAero_xxx\n\n\n WIFI\u00a0password\n zerooneaero\n\n\n IP address\n 192.168.2.1\n\n\n Subnet mask\n 255.255.255.0\n\n\n Gateway\n 192.168.2.1\n\n\n Port number\n 14550\n\n\n Serial port baud rate\n 921600\n\n\n Operating voltage\n 5V\n\n\n Size\n 2819mm\n\n\n weight\n about 44g\n\n\n Support flight control\n ArduPilot PX4\n\n\n Communication protocol\n UDP\n\n\n WIFI transmit power\n Maximum 19.5DBM\n\n\n WIFI frequency range\n 2.4-2.4835G\n\n\n WIFI channel\n 1-14\n\n\n WIFI transmission rate\n 11B\/G\/N\n\n\n WIFI antenna gain\n 3DB\n\n\n\n\u00a0\nSize","is_draft":"0","editor_type":"3","file_path":"","add_time":"1741307912","update_time":"1752026611"},"pure_content":"Product characteristics\n\nVery low cost data transmission solution\n200m communication distance\n2.4G communication frequency\nSupport APM\/PX4 open source flight control\n\n\u00a0\nOneWLink Specifications\n\n\n\n Ite"},{"id":"361594","string_id":"l4uF4gd7","status":"1","parent_id":"354800","slug":"l4uF4gd7","order":"0","name":"Product user manual","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1752026631","add_time":"1741653347","update_time":"1752026632","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"361594\", \"354800\"]","content":{"content_id":"361594","content":"
Product function<\/h2>\n
OneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.<\/p>\n
Wiring instructions<\/h2>\n
Connect TELEM1 or TELEM2 ports of flight control.<\/p>\n
$\"\"$ <\/p>\n
Use Ardupilot firmware<\/h2>\n
Flight control parameter configuration<\/span><\/h2>\n
For example, OneWlink connects to TELEM1 port of flight control. Flight control connects to the computer via type-C data cable,<\/p>\n
Connect to the Mission Planner ground station, in the Configuration\/Commissioning \"All Parameters\" table,<\/p>\n
Search SERIAL1_BAUD, change the value to 921 (corresponding to the baud rate of 921600), point write parameters, flight control power off and restart.<\/p>\n
<\/p>\n
Wireless communication link<\/h3>\n
The computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero<\/p>\n
The mission planner ground station is automatically connected to flight control;<\/p>\n
If there is no automatic connection, select port UDP point connection, enter port 14550, click ok.<\/p>\n
Note: If you still can't connect, check if the firewall is blocking mission planner's wireless link communication<\/p>\n
<\/p>\n
Use PX4 firmware<\/h2>\n
Flight control parameter configuration<\/h3>\n
For example, OneWlink connects to TELEM1 port of flight control. The flight control connects to the computer through the type-C data line and connects to the Qgroundcontrol ground station. The X6\/X6 AIR flight control needs to manually add ports to connect.<\/p>\n
Search for SER_TEL1_BAUD in parameters to change the baud rate to 921600, and the flight control power off and restart.<\/p>\n
Wireless communication link<\/h3>\n
The computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero<\/p>\n
Add a new PORT on Comm Links of QGC ground station, name arbitrary, TYPE UDP, and port 14550 by default.<\/p>\n
<\/p>\n
Select port, point connection<\/p>\n
<\/p>\n
<\/p>\n
<\/p>\n
<\/p>","pure_content":"Product function\nOneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.\nWiring instructions\nConnect TELEM1 or TELEM2 ports of flight control.\n\nUse Ardupilot firmware\nFlight control parameter configuration\nFor example, OneWlink connects to TELEM1 port of flight control. Flight control connects to the computer via type-C data cable,\nConnect to the Mission Planner ground station, in the Configuration\/Commissioning \"All Parameters\" table,\nSearch SERIAL1_BAUD, change the value to 921 (corresponding to the baud rate of 921600), point write parameters, flight control power off and restart.\n\nWireless communication link\nThe computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero\nThe mission planner ground station is automatically connected to flight control;\nIf there is no automatic connection, select port UDP point connection, enter port 14550, click ok.\nNote: If you still can't connect, check if the firewall is blocking mission planner's wireless link communication\n\u00a0\nUse PX4 firmware\nFlight control parameter configuration\nFor example, OneWlink connects to TELEM1 port of flight control. The flight control connects to the computer through the type-C data line and connects to the Qgroundcontrol ground station. The X6\/X6 AIR flight control needs to manually add ports to connect.\nSearch for SER_TEL1_BAUD in parameters to change the baud rate to 921600, and the flight control power off and restart.\nWireless communication link\nThe computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero\nAdd a new PORT on Comm Links of QGC ground station, name arbitrary, TYPE UDP, and port 14550 by default.\n\nSelect port, point connection\n\n\u00a0\n\u00a0\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1741653347","update_time":"1752026631"},"pure_content":"Product function\nOneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone a"}],"content":{"icon":"","desc":"","content_id":"354800","add_time":"1741307908","update_time":"1741307908","content":"","is_traffic_less":"0","file_type":""},"hot_list":[],"user_read_num":"0","is_auth":"0"},"msg":"Success","code":200}

Item<\/strong><\/td>\n	Default parameter<\/strong><\/td>\n<\/tr>\n
WIFI ID<\/td>\n	ZeroOneAero_xxx<\/td>\n<\/tr>\n
WIFI password<\/td>\n	zerooneaero<\/td>\n<\/tr>\n
IP address<\/td>\n	192.168.2.1<\/td>\n<\/tr>\n
Subnet mask<\/td>\n	255.255.255.0<\/td>\n<\/tr>\n
Gateway<\/td>\n	192.168.2.1<\/td>\n<\/tr>\n
Port number<\/td>\n	14550<\/td>\n<\/tr>\n
Serial port baud rate<\/td>\n	921600<\/td>\n<\/tr>\n
Operating voltage<\/td>\n	5V<\/td>\n<\/tr>\n
Size<\/td>\n	28*19mm<\/td>\n<\/tr>\n
weight<\/td>\n	about 44g<\/td>\n<\/tr>\n
Support flight control<\/td>\n	ArduPilot PX4<\/td>\n<\/tr>\n
Communication protocol<\/td>\n	UDP<\/td>\n<\/tr>\n
WIFI transmit power<\/td>\n	Maximum 19.5DBM<\/td>\n<\/tr>\n
WIFI frequency range<\/td>\n	2.4-2.4835G<\/td>\n<\/tr>\n
WIFI channel<\/td>\n	1-14<\/td>\n<\/tr>\n
WIFI transmission rate<\/td>\n	11B\/G\/N<\/td>\n<\/tr>\n
WIFI antenna gain<\/td>\n	3DB<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n <\/p>\n Size<\/h2>\n $\"\"$ <\/p>","pure_content":"Product characteristics\n\nVery low cost data transmission solution\n200m communication distance\n2.4G communication frequency\nSupport APM\/PX4 open source flight control\n\n\u00a0\nOneWLink Specifications\n\n\n\n Item\n Default parameter\n\n\n WIFI ID\n ZeroOneAero_xxx\n\n\n WIFI\u00a0password\n zerooneaero\n\n\n IP address\n 192.168.2.1\n\n\n Subnet mask\n 255.255.255.0\n\n\n Gateway\n 192.168.2.1\n\n\n Port number\n 14550\n\n\n Serial port baud rate\n 921600\n\n\n Operating voltage\n 5V\n\n\n Size\n 28*19mm\n\n\n weight\n about 44g\n\n\n Support flight control\n ArduPilot PX4\n\n\n Communication protocol\n UDP\n\n\n WIFI transmit power\n Maximum 19.5DBM\n\n\n WIFI frequency range\n 2.4-2.4835G\n\n\n WIFI channel\n 1-14\n\n\n WIFI transmission rate\n 11B\/G\/N\n\n\n WIFI antenna gain\n 3DB\n\n\n\n\u00a0\nSize","is_draft":"0","editor_type":"3","file_path":"","add_time":"1741307912","update_time":"1752026611"},"pure_content":"Product characteristics\n\nVery low cost data transmission solution\n200m communication distance\n2.4G communication frequency\nSupport APM\/PX4 open source flight control\n\n\u00a0\nOneWLink Specifications\n\n\n\n Ite"},{"id":"361594","string_id":"l4uF4gd7","status":"1","parent_id":"354800","slug":"l4uF4gd7","order":"0","name":"Product user manual","type":"2","cover":"","cover_alt":"","desc":null,"website":"","contact":"","seo_title":"","seo_keyword":"","seo_desc":"","share_switch":"0","share_code":"","author":"","published_time":"1752026631","add_time":"1741653347","update_time":"1752026632","corp_auth_id":"0","verify_code_auth_id":"0","editor_type":"3","file_type":"","auth_id":"[\"361594\", \"354800\"]","content":{"content_id":"361594","content":" Product function<\/h2>\n OneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.<\/p>\n Wiring instructions<\/h2>\n Connect TELEM1 or TELEM2 ports of flight control.<\/p>\n $\"\"$ <\/p>\n Use Ardupilot firmware<\/h2>\n Flight control parameter configuration<\/span><\/h2>\n For example, OneWlink connects to TELEM1 port of flight control. Flight control connects to the computer via type-C data cable,<\/p>\n Connect to the Mission Planner ground station, in the Configuration\/Commissioning \"All Parameters\" table,<\/p>\n Search SERIAL1_BAUD, change the value to 921 (corresponding to the baud rate of 921600), point write parameters, flight control power off and restart.<\/p>\n <\/p>\n Wireless communication link<\/h3>\n The computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero<\/p>\n The mission planner ground station is automatically connected to flight control;<\/p>\n If there is no automatic connection, select port UDP point connection, enter port 14550, click ok.<\/p>\n Note: If you still can't connect, check if the firewall is blocking mission planner's wireless link communication<\/p>\n <\/p>\n Use PX4 firmware<\/h2>\n Flight control parameter configuration<\/h3>\n For example, OneWlink connects to TELEM1 port of flight control. The flight control connects to the computer through the type-C data line and connects to the Qgroundcontrol ground station. The X6\/X6 AIR flight control needs to manually add ports to connect.<\/p>\n Search for SER_TEL1_BAUD in parameters to change the baud rate to 921600, and the flight control power off and restart.<\/p>\n Wireless communication link<\/h3>\n The computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero<\/p>\n Add a new PORT on Comm Links of QGC ground station, name arbitrary, TYPE UDP, and port 14550 by default.<\/p>\n <\/p>\n Select port, point connection<\/p>\n <\/p>\n <\/p>\n <\/p>\n <\/p>","pure_content":"Product function\nOneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.\nWiring instructions\nConnect TELEM1 or TELEM2 ports of flight control.\n\nUse Ardupilot firmware\nFlight control parameter configuration\nFor example, OneWlink connects to TELEM1 port of flight control. Flight control connects to the computer via type-C data cable,\nConnect to the Mission Planner ground station, in the Configuration\/Commissioning \"All Parameters\" table,\nSearch SERIAL1_BAUD, change the value to 921 (corresponding to the baud rate of 921600), point write parameters, flight control power off and restart.\n\nWireless communication link\nThe computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero\nThe mission planner ground station is automatically connected to flight control;\nIf there is no automatic connection, select port UDP point connection, enter port 14550, click ok.\nNote: If you still can't connect, check if the firewall is blocking mission planner's wireless link communication\n\u00a0\nUse PX4 firmware\nFlight control parameter configuration\nFor example, OneWlink connects to TELEM1 port of flight control. The flight control connects to the computer through the type-C data line and connects to the Qgroundcontrol ground station. The X6\/X6 AIR flight control needs to manually add ports to connect.\nSearch for SER_TEL1_BAUD in parameters to change the baud rate to 921600, and the flight control power off and restart.\nWireless communication link\nThe computer recognizes the wifi signal from the module, the wifi name is ZeroOneAero_xxx, and the connection password is zerooneaero\nAdd a new PORT on Comm Links of QGC ground station, name arbitrary, TYPE UDP, and port 14550 by default.\n\nSelect port, point connection\n\n\u00a0\n\u00a0\n\u00a0","is_draft":"0","editor_type":"3","file_path":"","add_time":"1741653347","update_time":"1752026631"},"pure_content":"Product function\nOneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone a"}],"content":{"icon":"","desc":"","content_id":"354800","add_time":"1741307908","update_time":"1741307908","content":"","is_traffic_less":"0","file_type":""},"hot_list":[],"user_read_num":"0","is_auth":"0"},"msg":"Success","code":200}

Product function<\/h2>\nOneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.<\/p>\n

Wiring instructions<\/h2>\nConnect TELEM1 or TELEM2 ports of flight control.<\/p>\n<\/p>\n

Use Ardupilot firmware<\/h2>\n

Use PX4 firmware<\/h2>\n

Product function<\/h2>\n
OneWLink is equivalent to a hot spot, a serial port connected to the flight control, and a computer or mobile phone connected to wifi can realize the communication between the drone and the ground station.<\/p>\n

Wiring instructions<\/h2>\n
Connect TELEM1 or TELEM2 ports of flight control.<\/p>\n
$\"\"$ <\/p>\n